Warthog Sewer Nozzles Waterjet Technologies is a proud distributor of Warthog Nozzles.

We know that when you want to take on any sewer and drain cleaning job with confidence you need nozzles that work. The problem is that each job has its own set of obstacles and that can be frustrating, take more time, and cutting into your profit. You need a nozzle you can depend on, and the Warthog Nozzle is one of the most trusted nozzles on the market!

2-4
INCHES

2-4
INCHES

3-8
INCHES

3-8
INCHES

4-8
INCHES

4-8
INCHES

6-18
INCHES

6-18
INCHES

8-36
INCHES

8-36
INCHES

WV Classic

2-4 INCHES

WV CLASSIC

The WV-1/4-LK uses StoneAge’s flow-through technology and features a revolutionary high-speed rotating design with no high pressure seals or bearings to service making it low maintenance. It cleans lines as small as 2” (51 mm) with long sweeping elbows.

The tool has a 1/4” NPT pipe thread inlet and can pass through long radius elbows in lines 2” (51 mm) and larger if a 1/4” NPT hose fitting is used.

1/4” NPT / BSPP INLET

3-8 GPM | 11-30 LPM

1,200-5,000 PSI | 83-345 BAR
Rotational speed controlled by pressure/flow

Excellent for navigating elbows

Clears grease, fat, ice and fine roots

WT Classic

3-8 INCHES

WT CLASSIC

Our smaller Classic series models can negotiate elbows and clean-outs commonly found in laterals at homes, buildings, restaurants and other light commercial facilities. This tool is most commonly used on small capacity pumps and cart jetters. Also an excellent choice for cutting roots, clearing ice and removing blockages.

1/2″ OR 3/8″ NPT / BSPP INLET

5-21 GPM | 19-79 LPM

1,200-5,000 PSI | 83-345 BAR
Excellent for Navigating Elbows and Bend

Carbide wear buttons extend nozzle life

Cuts roots, clears ice and blockages

Available for 1/2″ and 3/8″ Inlets

WS Classic

4-8 INCHES

WS CLASSIC

The WS-1/2 is designed to handle 4”-8” (102-204 mm) lines and is most commonly used with trailer jetters. It is used to clean lines in restaurants, hospitals, multi-story apartment buildings, residential, and other applications. Easily removes grease, cuts roots, and clears ice and soil blockages.

OPTIONAL RIGID AND JOINTED INLETS

The WS-J model allows the inlet hose to bend to the side, shortening the rigid length of the tool and allowing limited access applications to be cleaned much easier.

The WS-P6 and WS-P8 are excellent for straight pipes. The whip hose is removed, allowing the hose to connect directly to the tool

1/2” NPT / BSPP INLET

8-20 GPM | 30-76 LPM

1,200-5,000 PSI | 83-345 BAR

Whip hose, jointed inlet and direct connection available
Navigates sweeping bends

Whip hose, jointed inlet and direct connection available

WH Classic

6-18 INCHES

WH CLASSIC & WHR CLASSIC

The WH-1/2 and the WH-3/4 are the same tool offered with different inlet ports, either 1/2″ or 3/4” NPT or BSPP. The WH models are best for 6-18” (152-457 mm) lines. These tools are most commonly used with small capacity combination trucks and large trailer jetters.

The Warthog WHR Magnum is designed for mid-size pipes and lines, with the proven power and durability of the Magnum line of sewer tools.

Descaling Heads are available for both models.

1/2″ OR 3/4” NPT OR BSPP INLET

10-50 GPM | 38-189 LPM

1,200-8,000 PSI | 83-552 BAR

Descaling head available
The industry’s work-horse nozzle since 1990

Controlled rotation allows jets to penetrate deeper through deposits to clean and clear pipes

Descaling head available
1/2″ OR 3/4″ NPT / BSPP INLET

14-50 GPM | 53-189 LPM

1,200-8,000 PSI | 83-552 BAR

Reduced operation expense and less downtime

Effectively handles recycled water

Switch between descaling and pulling mode without leaving pipe
Reduced operation expense and less downtime

Effectively handles recycled water

Carbide nozzles generate higher quality, longer
lasting jets

Independently replaceable centralizer fins

Customizable rotation speed via viscous fluid options

WH Classic

8-36 INCHES

WG & WD CLASSIC
WGR Magnum

The WG is the proven choice for municipal, industrial and commercial drain cleaning applications. Predominately used in large combination trucks with 1” (25 mm) hose, the WG-1 is field-maintainable for low cost of ownership and can be fitted with replaceable AP2 nozzle tips sized to maximize pump effectiveness.

Proven effective for municipal, industrial and commercial drain cleaning applications, the Warthog WD 1-1/4 is designed to handle the same applications as the WG-1 but at higher flows. The 1-1/4” inlet combined with seven ports effectively distributes more water. The WD 1-1/4 is field-maintainable for low cost of ownership and can be fitted with replaceable AP2 nozzle tips sized to maximize pump efficiency.

1″ OR 1-1/4″ NPT / BSPP INLET

80-120 PGM | 303-454 LPM

1,200-5,000 PSI | 83-345 BAR
WG:
The industry’s work-horse nozzle since 1990

Controlled rotation allows jets to penetrate deeper through deposits to clean and clear pipes

WD:
High flow capacity up to 120 gpm (450 l/min)

Proven effective for municipal, industrial and commercial drain cleaning applications

Controlled rotation allows jets to penetrate deeper through deposits to clean and clear pipes
1″ OR 1-1/4″ NPT OR BSPP

1,200-5,000 PSI | 83-345 BAR

50-80 GPM | 189-303 LPM

Extended life, reduced downtime

Effectively handles recycled water

Switch between descaling and pulling mode without leaving pipe
Extended life, reduced downtime

Durable carbide nozzles

Customizable rotation speed

1600 hour extended service life

Handles recycled water

Contact us today

Call us at

(832) 663-6280

Our office

8765 Spring Cypress Rd L137, Spring, TX 77379

    Contact Me

    Needs Assistance? Let’s Get in Touch

      Cart

      No products in the cart.