S300
This system has enhanced the power from its Aqua-Dyne affiliate, a proven design already, by upgrading the power frame and cross heads to a much stronger material, ductile iron. Also, now our bare shaft pumps feature a crankshaft machined from billet and are drilled for forced lubrication.
We will offer two models, the S300-15 and the S300-20, capable of handling pressures to 15,000 and 20,000 psi respectively. Both bare shaft pumps feature hinged manifolds for easy access to the quick change valve cartridges, plungers and stuffing boxes.
Rated to 300 HP
Flow rates: 48 GPM @ 9,000 psi / 26 GPM @ 15,000 psi / 20 GPM @ 20,000 psi
Crankshaft machined from billet, with induction hardened journals
Forced lubrication for crankshaft
High strength ductile iron power frame
Hinged cover to pump well
Quick change convertible manifolds from 15,000 to 20,000 psi
Hinged trunnion assembly for swing down manifold
Quick change cartridge assembly for suction and discharge valves
Flow rates: 48 GPM @ 9,000 psi / 26 GPM @ 15,000 psi / 20 GPM @ 20,000 psi
Crankshaft machined from billet, with induction hardened journals
Forced lubrication for crankshaft
High strength ductile iron power frame
Hinged cover to pump well
Quick change convertible manifolds from 15,000 to 20,000 psi
Hinged trunnion assembly for swing down manifold
Quick change cartridge assembly for suction and discharge valves
S50 BARE SHAFT PUMP
The key to this pumps long lasting capabilities and hundreds of hours of trouble-free operation are that it offers low load packing, special filtration, a closed loop non-drip cooling and water lubrication system for alumina ceramic or tungsten carbide plungers.
The individual lightweight suction and discharge manifolds are easily removed for routine maintenance, and field changing the packing or plungers takes five minutes with no special tools required.
Rated to 50 HP
Number of Cylinders: 3
Plunger Strokes: 1.97"
Plunger Load: 3,800 lbs
Oil Capacity: 1 Gallon
Pump Weight: 130 lbs
Unique "Valve-In-Line" Fluid Ends design provides higher volumetric efficiency for increased productivity & lower operating costs.
FLUID END SPECS
Stainless Steel
Valve & Seats: High strength stainless steel in-line valve system. All valves may be reconditioned by surface grinding.
Plungers: Non-scoring ceramic.
Packing: V-Rings of advanced polymer material are self-adjusting, giving long service when used when used with non-scoring ceramic plungers.
Lubrication: Plungers and packing are lubricated by fluid from manifold.
Manifold: Light-weight modular manifold is easily removable for simple maintenance.
POWER END
Power Frame: High strength aluminum casting with sturdily ribbed wall sections.
Crankshaft: High strength ductile iron, may extend from either side.
Crankshaft Bearings: Heavy duty taper roller bearings. Crossheads - Cylindrical type-high strength alloy castings. Crosshead wristpins are hardened & ground steel. Extension rods are highly polished stainless steel.
Lubrication: Power end parts are splash lubricated. Connecting Rods - High strength, solid section, ductile iron.
Oil Wiper Seals: Sealed lubricating polymer.
Number of Cylinders: 3
Plunger Strokes: 1.97"
Plunger Load: 3,800 lbs
Oil Capacity: 1 Gallon
Pump Weight: 130 lbs
Unique "Valve-In-Line" Fluid Ends design provides higher volumetric efficiency for increased productivity & lower operating costs.
FLUID END SPECS
POWER END
Complete Aqua Safe Suit P/N AQSS1
S/M
L/XL
XXL/XXXL
Aqua Safe Bibs/Overalls P/N AQSB1
S/M
L/XL
XXL/XXXL
Foot Covers P/N AQSF1-PR
One Size -Pair
S/M
L/XL
XXL/XXXL
Aqua Safe Bibs/Overalls P/N AQSB1
S/M
L/XL
XXL/XXXL
Foot Covers P/N AQSF1-PR
One Size -Pair
FLEX LANCE SAFETY GRIPS
10-15K psi FLEX LANCE SAFETY GRIPS
The Flex Lance Safety Grip is designed to minimize the risk on injury to flex lance operators caused by a live nozzle exiting the tube unexpectedly. The comfortably contoured handle makes it easy to hold the safety grip against the tube sheet, allowing retraction of an active nozzle in to a stainless steel sleeve,where the force of the jets is dissipated.
The Flex Lance Safety Grip is simple to install and is quickly adapted to handle various lance sizes by selecting the appropriately sized lance stop.
Simply unscrew the diffuser from the safety grip handle, which will allow the lance stop to be removed. Insert the new lance in to the back of the safety grip handle. Select the correct size lance stop for the lance to be used and place it on to the lance behind the nozzle end fitting. Insert the nozzle through the diffuser and tighten the assembly in to the handle.
(Note: the larger diameter end of the lance stop must be next to the end fitting.)
(Note: the larger diameter end of the lance stop must be next to the end fitting.)
Contact us today
Call us at
(832) 663-6280
Our office
Waterjet Technologies, LLC
118 Vintage Park Blvd
Ste. W122
Houston, TX 77070
Contact Me